Quote:
Originally Posted by upallnight
Other than cutting the plastic frame is there any splicing or cutting into the factory harness? You mention about connecting the CAN module, is the connection located at the front of the car or at the back of the car? Can you still set the equalization for DSP?
|
I'm on my way home, will answer to more questions when I get to play a little with it.But I'll tell you now that there's no splicing or cutting necessary unless you have PDC and want it to show on the screen when you put it in reverse.
Jeff said some cars display the front PDC as well so I guess will have to try and see...
Now if you want a rear view camera they provide the plug for it you just buy the camera and run the wire to the back
As for the CAN box , the wire that connects to it is part of the big harness that connects the car to the N6 it just has it's own plug.Connect and drop it in the dash or secure it somewhere so it won't rattle..
Hopefully I was clear enough...I'll let you know about the equalizer