Quote:
Originally Posted by fmugur
Clicking test is good enough. If you put the key in position 2 then press the PDC button you activate your parking system and all the sensors front and rear should have the clicking sound. Those that don't are defective or a wiring problem. The flashing PDC button is because the error you have. The problem is that you have to have all the sensors working for the system to work otherwise just tells you to not rely on it.
I had a bad one in the back and one in the front and I had to replace them.
|
So my button is flashing too, so I went and did as you suggested, but when I did it seemed I heard a faint clicking noise through all of them.
I ran it in INPA and came up with this error:
Not sure what that means, so I ran it in DIS.
