Quote:
Originally Posted by ZetaTre
Good job!!!! [I'm lpcapital elsewhere, so thanks for the quote]
Last but not least, have you gotten the bracket installed under the EGR valve (I can't seem to see it from the pix you posted): if not call your local dealer, tell them to run your VIN to check for any open campaign. The bracket support the EGR and reduces the risk of breaking around the flex joint. Here's the link to the bulletin: https://drive.google.com/file/d/1mDX...ew?usp=sharing |
I was thinking to install this bracket,but looks like after instalation the lower(intake) pipe of the EGR starts to break,with very bad effects.In more than a few cases the exhaust gasses escaping from a crack on the bottom pipe burn through the plastic T-stat housing.