New heads are in, cost me a lot. But I'm still playing nice, they gave me the old heads and should offer up new info if I ask for it. First off they are filthy with oil and carbon buildup. There's still residue from the old gasket on the bottom and these were bolted back on. Took them to an engine machine shop in town and he says he doesn't see anything wrong with them. My invoice from Bema states that "Eccentric shafts were binding after heads were reinstalled". They aren't, they move freely. The machine shop suggested I look over a parts schematic to make sure everything is in the correct place since he has no other ideas why they chucked the old heads. Worth mentioning the cylinder head warp on machine shop report is "0.001" or less".