01-27-2015, 12:20 PM
|
|
Member
|
|
Join Date: Oct 2013
Location: Fort Smith, AR
Posts: 230
|
|
Quote:
Originally Posted by bcredliner
Open the fill cap when the engine is cold and has not yet run to check if coolant is up to the proper level in the expansion tank. Put the cap back on and make sure it is tight.
Do not remove the fill cap when the engine is running as the system is pressurized. Open The bleed screw, right next to the fill cap, should be open only enough so that coolant comes out and leave it open until only coolant comes out. Do not remove the bleed screw.
|
Do you need to siphon coolant out after you get to the no bubbles from the bleeder screw point?
Seems the level would be way to full if your pouring coolant into it until your bubble free.
__________________
I love this forum!!!! 
Alan
1999 BMW 328i sedan with auto...In progress...
2002 BMW X5 3.0i with auto...In progress...
2007 BMW Z4 3.0i 6 speed manual...In progress...
|