Quote:
Originally Posted by crystalworks
Your relay wiring is correct... assuming you are pulling a good switched 12v on pin 30.
Test your relay with the 9v battery across pins 85 + 86. If it closes my bet would be your switched 12v. Sub that for +12v at the battery and see what happens.
|
I will try the battery tomorrow. I've also dealt with drying out the interior. When I walked outside yesterday all of my windows and sunroof were wide open. I had the key in my pocket and something must have pressed the unlock button long enough to open everything up. It rained over night and I had 1/2" of water puddled on the floor.sh*t!
I picked up one of these:
1x Add A Fuse Tap Piggy Back Blade Fuse Holder GBNG | eBay
I plugged into the fuse panels in the truck, I still couldn't get the relay to close.
I bought another relay, all,they had was the 5 termina type. When I plug the camera/trigger lead on the normal closed position the camera picks up and shows on the Dynavin.
This is starting to get frustrating