Quote:
Originally Posted by jcp240z
The issue of the bolt heads not fitting is a common one if you read the old threads. It seems they originally designed for the 16mm heads and then changed to 17mm without revising the holders. The installers typically grind or flatten the tabs down to use the 17mm bolts.
|
Ah hah! An explanation! I didn't think about digging through old posts. I just thought I was going nuts. Since the bolt has to fit down into the recess past the tabs - they must have chiseled the thing to open it up. I've just been carefully grinding down the flats a little at a time 'till the bolt snaps in place.
Sent from my iPhone using Tapatalk