View Single Post
  #21  
Old 02-12-2015, 01:24 PM
Doru Doru is offline
Member
 
Join Date: Sep 2011
Location: Calgary
Posts: 747
Doru is on a distinguished road
The mounting points of both those might match. But one is for the 4.6, the other for a 3l engine. You have the 04' 4.4 - the oil cut-off might not be right one. Plus, the 04' model has another cut-off for the oil filter, which is also under the car, as opposed to the pre 04' v8 which have the oil filter in the engine bay.
The bolts for the stiffening plate are torque to yield and zinc coated. Not sure what the relative strength spec is for them (9.8 10.9 12.9?) and this is important, because if you use a Home Depot bolt with a lower strength, and you apply the recommended torque, you might twist them off, or even worse, have them mounted, but they can fail whenever you need the car the most.
__________________
Stable: e92is, e46 M54B25, e83 N52, e53 N62 - sold, e39 M54B30 R.I.P.
Reply With Quote

Sponsored Links