Quote:
Originally Posted by TiAgX5
Front total toe; 18', +/- 10'
" camber; -12', +/- 20'
Rear total toe; 18', +/- 10'
" camber; -1. degree 50', +/- 20'
|
These are factory specs.
As I mentioned prior, I set to MINIMUM factory specs....
My front and rear total toe is around 10' (1/6th of 1 degree TOTAL, 1/12 of a degree on each side)
F camber (-12', +/- 20' spec) has a tolerance that allows for positive camber. I don't like positive camber, and set to around -10' (1/6th of 1 degree).
I actually mounted a dial indicator and adjusted the rear camber adjusters to the minimum camber. It checked around -1 degree 20' (1.33 degrees) during alignment.
Camber with minimum toe will not wear the inner edge of the tires.
Camber and excessive toe eats the inner tire edge.