Thanks Brit6, that did the job.

So, let me recap for the group. This is on my right (passenger) door. The plastic nut holder worned out. That might been gone bad for a while because both of them are shorter than new. After that, the guide on the right rail was broken so the glass is not being held tightly by the guide. The left guide is still attached to the glass. On the top, the right edge is some-how touching the door carrier internally. Before the fix, when I tried to power sliding up, it would move 1/8 of inch upward and my door handle from outside would pop out a bit.

So, I order a new regulator online and parts arrived today. I cut the long cross wires, and that didn't help because the glass is attached on the left side. The left wire is thicker than the long cross one and I had a hard time cutting it. So, I went to Lowes and bought a heavy duty cable cutter and that did the work. Once the cable is cut, I would be able to slide the guide up. After a bit wiggling, I was able to move up the guide to line up the hole to remove the screw that tied to the glass.

After that, it's down hill a regular regulator replacement like any other.