Quote:
Originally Posted by Chris F.
You did the correct wiring for your M, right? There are two scenarios in the retrofit instructions - with fogs and without fogs. Your M has those huge intercoolers instead of fogs, so you do NOT have option 524.
Chris
|
Hmmm... now that makes more sense. I had the understanding that option SA524 was for adaptive headlights, which is what my vehicle was originally optioned with... so I wired the harness as if it had SA524.
So mine should be wired
without SA524?
Quote:
Originally Posted by bawareca
Nice car and tasteful mods. How is the rear camber after the X was lowered?
The FRM has to be coded correctly, nothing else. I didnt find you mention which tools you are using. If use ISTA it will get coded according to the car's original "Vehicle order", where this type of light dont exist. Also ISTA may not accept it at all because FRM3 may have never been installed in this model/range of VIN. Most probably you will need custom coding of the FRM to make it work correctly.
|
I know the rear has a bit more camber, but it doesn't appear much different than stock. I still need to dial everything in.
I believe my shop will be using Autologic to code the new FRM3. If I need custom coding, can this be done remotely?
...and do you know of a person/shop who can accomplish this for me?
Thanks for your help guys!
