Quote:
Originally Posted by bcredliner
I would spray it with penetrating oil and let it sit for a few hours and spray it again and let it sit overnight, drill a small hole so that you can try to turn it out with an easy out bit.
|
Quote:
Originally Posted by andrewwynn
50/50 mix of acetone and ATF (automatic transmission fluid) wins every face-off I've seen to unstick frozen bolts. I used not long ago to remove the anode from an electric water heater.
Sent from my awrPhone using Tapatalk
|
Thanks for the ideas guys.
I thought about extracting the screw, but since I was dealing with sticky caliper initially, I will just replace the caliper with reman unit.
Just don't want to spend more on this stupid screw.