Quote:
Originally Posted by X5INGH
Yes just left halo.. 100% sure it will be wiring related.
Did anyone have to remove old FRM wires to install wiring harness pins? I had to on both connectors on the FRM. i.e. I took out a white/green (which I just taped up) on connector X14260 to install A8 which was also white/green, with much same on connector X14261 I took out white/blue (which I taped up) to install A9 which was also white/blue. IT didn't mention to remove these at all on the instructions... But I just followed instructions assuming that's how things are meant to be and maybe that my car was wired differently to begin with?
|
That is indeed strange, did you have halogen or Xenons to start?
The White/Green and White/Blue wires are for the high beams I believe, but am not 100% sure. So I am assuming you remove the outer casing on each FRM connector, removed the pin and popped the new ones in?
Can you friend try the coding again? Have you tried disconnecting the battery and then connecting it again?
If the halo's worked before, then something is definitely up. This is a new FRM, right? Perhaps its a bad FRM, as much as I hate to say it.
Chris