Quote:
Originally Posted by upallnight
If you hear clicking sounds after your turn off the engine near the bottom of the driver side door (assuming your X is LHD) the actuator gear in the transfer case is stripped. If you don't hear the clicking when you shut off the engine, it's something else. Most likely a wheel sensor. In addition to the wheel sensor, get a new connector case for the wiring harness because when you go to remove the wheel sensor connector from the car wiring harness the plastic connector will crumble.
|
I'm smart enough to know you don't remove the steering wheel to fix a bad alignment. I had an alignment done, the wheel is nice and straight now. They used a hydraulic lift to lift only the front passenger wheel high off the ground while the car was still running. I've purchased the actuator gear and the transfer case module. The dealer said their codes indicate it's the transfer case module, but I never believe them because they're wrong most of the time. I will update the week after Labor Day once the work is been complete.