Quote:
Originally Posted by lucardo
The special interface cable will Split the firewire iPod/connector into USB power and aux-in, so I would be in the same spot after spending a few €...
How tough is it to swap the combox? I would love to change it but i dont want to spend as much €€ as beemertech is asking for.
|
If your x5 is a 9/2010 then it has the CIC correct ?
You will have the MULF2 that handles usb and aux input. You can still plug in a usb stick and listen to music - correct ?
So in order to use the iphone with Mulf 2 you need to purchase the y-cable as others have mentioned. The problem is that unless the mulf2 firmware is not upgraded by the dealer you still may run into issues. Another issue with mulf2 is that although it appears to charge iphone5 and newer, infact it doesnt. It only maintains the battery level. Probably because newer iphones require more current to charge them.
One cheap option is to use the tune2air wma3000b interface for bluetooth audio streaming. Plug it into the usb and aux jack and you will be up and running.