Agreed a new key would be a good thing too since that starts a lot of the sync processes over and it is always also a great idea.
I do have my doubts given that it did read the key on INPA however I hope that my skill (or lack there of in software here) is obvious.
Ghost,
I did just look in Programan SSS v32 that I have found it not to exactly follow those directions you posted.
Bonus: I did finally turn off my day time running lights!
From link above
Using Progman to synchronize the DME to the car:
1. Follow steps 1 -4 of the previous procedure.
2. Open the Progman application.
3. Choose your car and chassis.
4. Wait a few minutes for the Progman to collect the ZCS values.
5. When it asks for retro ts select NO.
6. Select EWS Calibration
7. Click YES to start the calibration
8. Turn the car’s key to the OFF position and click continue
9. Wait 25 se conds.
10. Turn the car’s key to the ON position and click continue
11. Click Finish
12. Start the car
on Programan SSS v32
Step 5 does come up and there is no direct option to select step 6 EWS however I did find something called "EWS Adjustment"
Vehicle
Then Initializations
Then Carry out EWS Adjustment
Also not related to EWS I found Steering Angle Calibration under
Vehicle -> Service Functions -> LWS
