Hi, these passed weekend I had some time to do these Raps
made from 2x10 treated wood the ramps are 58l X 9h X 11w(it log, because of my E39 Seats low and i don't want to hit the from bumper) . where the vehicle seats ones its up its 10FT long by 12in Wide It rises 9 inches high from the floor. I find that it a good clearance for working on something like the transmission diff etc. I did use the 6 stacks and the ramps from work that they where going to trow away and purchase the two 10F X12in at home depot for 16 and some change.
When I drove on the ramps with the X5 i was a bit scare but there was no flex of the ramps at all.
Hope that you like and it could help others For next week I hope to start my work bench that I want to Build. For been my first wood work I think i did pretty good.
(don't mind the tape on the garage door I recently move to these House and I haven't do much on it)

Attached Images

     

__________________
5G Ford Ranger Lariat 2022

E36/7 Z3 97 1.9 New project

E53 X5 4.6is 02 OFF to Bring a trailer soon
Land Rover Disco 2 03 - sold
Kawasaki Z900B 17- sold
E53 X5 3.0 5M/T 01-sold-again
E53 X5 4.4 05-the beast a 4.8tu swap. at 150k -SOLD

E83 X3 3.0-the wife's - sold
R56 Mini Cooper S 07-sold
E36 M3 97 - sold
E36 M3 98-sold
E39 528i 00-sold
E30 318i 91-sold
E36 M3 95-sold

https://www.youtube.com/channel/UCcI..._as=subscriber