Compression test doesn't involves engine running,just cranking for a few seconds each time you change the cylinder.I personally would do it just like that,but to be on the same side,just bolt the oil pan back refill with a minimum oil needed and proceed,ah a new filter wouldn't hurt,so you have less glitter passing into the oil passages.
When I bought the X it had the guides failed and no oil pressure...that said,I couldn't be sure about the previous guy stopping it right away it lost the pressure or driving for a while just like that,before the guides overheated and failed.
In your case if the oil pressure is still there,I personally see no reason to spend more money than needed.Only if the compression test shows good numbers.
If you go the rebuild road get a kit from these guys.The generic chinese copies are not easy to perform the timing alone.
Every guy that used this kit had positive and trouble free experience.Some of them had to get it anyways to retime after using chinese counterfeits.
G.A.S. BMW Tools
Quote:
Originally Posted by NismoGT
That is what concerns me now. I dont really want to pull the heads and replace valves.
I did not perform a compression test yet. Can I still perform one with the lower oil pan dropped and get accurate numbers? It would be a blessing if I only had to do the timing chain, maybe VANOS refresh and other regular maintenance stuff.
|