Finally getting around to installing my Eonon GA5166 head unit just wondering how folks have gone about securing it? I know a lot of the aftermarket units pretty much have the same built-in bezel not a separate, removable one like the stock unit. I've read about folks cutting the foam from the packaging to wedge it in there but is there anything else one can do (i.e. Velcro strips, etc...)?

I used the 4 screws on the bottom of my 16:9 boardmonitor plus two zip ties in the top corners to secure my stock HU.

I don't see how you could use zip ties at all with these...

__________________
Indy Shops:

Berkeley:
German Auto Sport

Phoenix:
Babbitt Motor Werks | Arizona Bimmer Motor Works

Reno:
Reno Rennsport

Rides:
00 BMW X5 4.4
93 Nissan 300ZXTT
88 Nissan 300ZXT Shiro #853
88 Nissan 300ZXT Shiro #773
84 Nissan 300ZXT 50th AE
78 Datsun 280Z Black Pearl
15 Yamaha WR250R
06 Yamaha R1 AE

Email:
WE350Z at gmail