Quote:
Originally Posted by tarnationsauce2
1st post! 
Non DSP standard MID setup with CD.
Engine oil was at some time stored in the compartment in the left rear (directly above the amp). And some of that oil made it's way onto the connector for the amplifier.
I cleaned the amp connector pin by pin, & cleaned with alcohol soak.
Still no audio. I do hear a very faint pop when I turn on the radio that makes me think the amp is turning on. I checked power, ground, remote turn on are all OK.
The MID does not have analog outputs. But the amp has analog inputs. What component makes that conversion? Where is it located? I think that may be faulty. I do have an o-scope so I will verify analog input signal is reaching the amp.
Thanks. |
All right another Oregonian! Don't worry about the radio, you'll get that fixed soon enough
. Check this out ...
http://www.xoutpost.com/bmw-sav-foru...53-owners.html
On a serious note I haven't really worked on the stock stereos but, I'm pretty sure there are some tests and some diagnostics available with in my software. That being said, I have software and could try if you want. It might point you in the right direction. Or we could just code your X and forget about the stereo
. I'm in Oregon City and love to tinker.
__________________
2001 E53 4.4 Alpine White, Sports Package
2000 E36/7 2.8 5 speed Bright Red w/ a HT!
