After reading some other posts it looks like INPA somehow disturbed DDE and EWS/CAS. Not my work but you can try this:I found it here.
1- Launch inpa
2- Select the engine
3- Choose the model of the engine
4- Select option: activate
5- Select option: EWS (Or CAS.not sure??)
6- Select option: reset ----> in progress ----> click ok
7- Back to the main menu, ie, back, back, back, and close the INPA
8- Open the inpa and check the errors. That errors should have gone by now.
9- Turn the ignition off, remove the obd connector and start your car.