We replaced the entire harness. I have checked and double checked all wiring and it's good. Pretty straight forward because everything just plugs in.

As for the truck thinking the door is closed, that was going on before I replaced the actuator. So after the wiring was torn up from trying to get in the truck the drivers door lock didn't work, because of obvious destroyed wiring, and the truck thought the door was always shut, which caused the drivers window to be able to roll down even after the key was out and the door was opened and the interior lights to not illuminate when opening the door. That isn't a new issue, but it's part of the whole problem. The issue of the auto up down not working, (the drivers window switch only being able to control the drivers window and mirror, wont control passenger side front and rear window, drivers side rear window, or passenger side mirror). That part all started while I was troubleshooting the new door lock actuator not working and it happened after I pulled fuses 20 and 24 and reinstalled, which was something I read and figured it was worth a shot but it just made another issue for me to deal with.