Hi David, I popped the pins out of the original connector, insulated them and left them behind the ashtray, after noting the colours and position on the connector. Using the now free connector I searched a couple of looms for the corresponding coloured wires at the rear and popped the pins out of the connectors they were on. I then re-insterted the wires/pins into the matching positions I previously noted. From memory there was only 4 or 5 wires in total. MID fired up and I can do all the original functions. The dimensions of it and the frame are perfect that it just presses and holds into position.

__________________
Neil

2016 X5 3.0D
2009 X3 3.0D
2005 X5 3.0 Diesel Sport (sold)
2007 320i (sold)