Quote:
Originally Posted by bcredliner
Take the approach there are no coincidences which means exhaust all efforts to troubleshoot the links and the sensors first before spending any time on the pump or a leak.
So I am clear, you have checked the rear sensors and the arm is positioned as it was when the light was out. And, you have checked to be sure the links are still connected on both ends. And, you have checked to make sure the sensor housing is solidly in place.
|
Just installed the H&R spring set and rear lowering lins on my 4.6is. Upon startup and the drive I got the dreaded suspension inactive message. Pulled the vehicle into the garage read a few xoutpost postings on the subject matter and went back in the garage and rechecked the position of the leveling links. The one on the left side of the vehicle was not correctly positioned. Then went back on the road did 6 miles round trip and about halfway through the message disappeared. Thanks for the insight on this bcredliner.