Quote:
Originally Posted by upallnight
I ordered a set of those bushings and when I get them I will tell you how easily or hard it was to put them on a genuine BMW thrust arm.
|
I'm interested in your results then!
I'm not replacing my ball joints as they have no play and the boots aren't cracked. I'm also not replacing my tension rod (upper front control arm) as that checked out fine. The thrust arm bushing (lower front control arm) showed excessive play when I took a pry bar to it.
Quote:
Originally Posted by TiAgX5
Why drill them?
This is all you need....
|
Does that Harbor Freight puller include the necessary bits to push put the stock bushings, or will I need to take a trip to Home Depot to find the correct washers/pipe adapters to push it out?
Not worried about squeaks. I'll grease them with some Mobil1 grease I've used for plenty of bushings. Plus, a squeak here or there is nothing to me.