ok, just finished the AC belt. god, that was a royal PITA!!!
I was able to remove the adjustment bolt from the bottom with a few regular 1/4" extensions and a T40 hex bit. The bolt is actually a T45, but there's no way a 3/8" drive socket will fit in that tight space. So I just used the T40 bit and it worked. I bought a set of wobble extensions but end up not needing them.
Removing the adjustment bolt was a little tricky was doable. The hardest part for me was trying to align it just right to bolt it back on. It's not a straight shot as you can see from the picture. The damn pulley was in the way. I think it's almost easier just to loosen the bolt enough to slide the belt ON and then tighten it instead of removing the bolt completely.
Anyways, I did end up removing the bolt and cutting a slot on the end like DavidJ suggested. Now I can loosen it and work from above if I ever end to change the belt again. Hopefully not anytime soon.
Thanks for all your help and tips guys!!
