Xoutpost.com - View Single Post - Replace white regulator slider clips only or entire window regulator?

Ricky Bobby · #6 08-01-2016, 04:43 PM

Update on my end as I just completed this on my drivers door:

Definitely do it if your regulators are original and you don't have ridiculously large or fat hands. I have decently small hands and besides a few cuts, only took me about 20 mins to replace the clips (black window, and white "RegulatorFix" clips) once the vapor barrier was off.

I have another door carrier to do on the other side and will do both regulator clips and window clips on that one at the same time.

The rear windows are hardly ever used to be honest, so I probably won't have to address them for some time.

I think the most wear on the clips is slamming the door with the windows down or rolled halfway down.

My drivers door window rolls up/down much quicker now, and no rattles, or looseness from the glass at all. Very much recommended for the $15 per side you can repair this for, and a couple hours to take the door panel and vapor barrier off and take your time.

Sponsored Links

Sponsored Links