Quote:
Originally Posted by bhennrich
When you check in the trunk where the factory wiring is, see if it still has the blank (no wires installed) plug attached. If it does you can get the pins / sockets that fit in the harness at the dealer. Then just build it yourself. You already need to get pins for adding the brake controller. Then you just need to source the control module, ebay all day. When I did mine my X recognized the trailer module with out coding but some have not had the same luck as I did.  |
Ok, I get it... and I did see the connector for the tow module back there and some other connectors.
I saw you can get the individual pins for that particular connector, but where would I find out what connector to use and where to buy? I'm comfortable building a wiring harness but I would just need the connector.