Quote:
Originally Posted by crystalworks
I am going to do some troubleshooting but I can't seem to find the adaptive headlight control module's (A214) location. I'm trying to track down connector X10513 so I can do some diagnostics on it. Anyone have any ideas?
Edit: After doing some google searching it looks like the module is behind the glove box. That sound right? Looking for the 18pin X10513 connector that sends signals to the headlight solenoids.
|
crystalworks - the documentation I have indicates that module A214 is in "storage location C110" which is under the centre console.
A214 Adaptive headlight
Plug connector overview
Number X-pin, colour Description
X10513 18-pin, blue Plug connector Adaptive headlight
Pin assignments at plug connector X10513
Pin Type Description / Signal type Connection /
Measuring notes
1 E Voltage supply terminal 30 Fuse F15
2 A Component supply Left headlight
3 A Component supply Right headlight
4 M Ground Ground point
5 M Sensor ground Front right level sensor
6 M Sensor ground Rear right level sensor
7 E Voltage supply, terminal 15 Fuse F6
8 E Nominal value pick-up, load/level sensor Rear right level sensor
9 E Nominal value pick-up, load/level sensor Front right level sensor
10 E Brake light signal Brake light switch
11 Not used
12 A/E I/K-bus signal link Connector, I/K-bus
13 A/E CAN-bus high CAN-bus connector
14 A/E CAN-bus low CAN-bus connector
15 A Component supply Front right level sensor
16 A Component supply Rear right level sensor
17 A/E Bus signal, headlight vertical aim control Left headlight
18 A/E Bus signal, headlight vertical aim control Right headlight
X10513 Adapter 614470, storage location C110