Quote:
Originally Posted by Ricky Bobby
I put the Arnotts on mine 4 years ago up front and recalibrate. Been good ever since. I think they sell both rebuilt with new bags, and brand new assemblies.
Maybe since your struts are in excellent shape - I know you are pretty handy, might consider just putting the new Arnott bags on your front struts and rebuilding yours.
Also, what error are you throwing in EHC module? Mine were leaking for a while and I ended up having to replace the compressor since it was burnt out from being overworked keeping the front struts inflated.
|
Here are the errors I was getting:
7A EHC: Accumulator pressure rises (proceeding upwards out of accumulator)
64 EHC: Distortion plausibility
Then I checked the accumulator pressure and it was 9.8 BAR
Compressor temperature : 68F
Not sure what I should be looking for though.
RB, any insight on these numbers and errors and what they might mean?
Compressor was replaced 2.5 years ago under warranty as well as rear air bags and sensors. I can definitely hear the compressor working and inflating the bags.
One weird thing it didn't do before is in the morning if the front is sagging, when I unlock the doors and open the drivers door, the car raises a good 2" then stops, and after I start the car, the compressor kicks in and inflates the rest to sit level....