Finally made time to sort out my front control arm bushes...
Also changed the front diff oil while I was under there. Boy, there sure are a LOT of screws/bolts to undo to get at the diff!!
Actually, the control arms were a little tricky to get at too - at least on the left side. The cold air inlet duct is a real pain to remove and re-fit.
Because I was "pottering" and cleaning as I went, the whole job took about 6 hours, including taking the arms to an auto engineering place to get the old bushes removed and the new ones pressed in.
All in all, a good day's work. Car feels much firmer in the front now.
Next task - engine breather/oil separator replacement and air filter. Many more screws to some out!
