Hello all,

I've done the required reading through the Trifecta threads, especially BlueBee et al.

I have found two roadblocks to successful trifecta diagnosis/repair.

Firstly, I cannot find a proper pin-out for the 2006 X5 ABS wiring which allows rule-out of the wheel-speed sensors. BlueBee has an E39, and there was another individual in the mountain of threads with a 2004 X5, but neither of their pinouts are the same as my vehicle. I can tell because there are a couple of pins in the connector which are un-used, and the location of the un-used pins does not match anyone elses pinout.

Because rebuilding the ABS module is relatively inexpensive (~$150) if it needs it, I removed the ABS module which is a huge pain, but have not been able to find a company which will rebuild it, as with the earlier years.

My BOSCH Part number is 0 265 950 351.
And is identified on the top with 3451 6773012-01

No one I've called/emailed has said they're able to diagnose/repair this module.

So I am stuck. I cannot rule out the wheel speed sensors for resistance etc without the pinout, and I cannot blindly send in the ABS module with hopes that this resolves it.

Halp?