Quote:
Originally Posted by vkkaraddi
I had the same issue when I changed the LEDs from regular bulbs.
All you need to do is open the fuse box under the glove box deep down , you need to open the three screws and later open a green screw to access the fuse box. The right fuse is on the right hand side 2 or 3 from the back . its a 10 amp fuse . replace it and then before putting the LED . check all works again. Then insulate the bulb holder with a electric tape so that it does not touch the body., then replace the bulb to LED and check again. Now you are done.
Thanks
|
So what would the fuse number be because I looked and I wana double check too. also I took it off and it looks like this now
so inside the glove box is empty just the connecting wire.
Sent from my iPhone using Tapatalk