Got another tip from Eonon tech support today which involves the "Factory Settings" menu from the main Settings menu.

The "Factory Settings" requires a PW and mine is 126 so maybe other units are the same????

The techs suggest you to enter the factory setting ( password 126), then choose the "Default Power Status" and select "Memory the status of last option".

Then click Apply and Exit. The unit will prompt for a re-boot. Re-boot and then the unit will remember what you had running when you last shut down and open those up when you restart.

Also, within this menu is a "Voice" tab. In this "Voice" tab you can set the volumes of various inputs above and below the factory settings. I set my BT a little higher than their default and you can also adjust the system volume. I raised mine to 12 and upon re-boot the volume at setting "1" was a little loud so I went back to 10 in the factory settings menu.

Mike

__________________

Mike
Dallas, TX & Appleton, WI
2003 E53 4.4i Pearl Beige
2003 E46 330Xi Monaco Blue
2007 E90 335Xi Black Sapphire Metallic
2011 F25 X3 28i Black Sapphire Metallic