View Single Post
  #112  
Old 02-17-2017, 12:23 PM
Clockwork Clockwork is offline
Member
 
Join Date: Feb 2011
Location: Calgary, Canada
Posts: 2,192
Clockwork is on a distinguished road
Quote:
Originally Posted by tmv View Post
I had just lowered my 4.8iS on Sunday using DIS. In my case, the rear right sits about an inch higher. I measured from center of the wheel to the edge of the wheel well. GT1/DIS will ask you to enter measurement for each corner and it will do the calibration base on that.
Using TwinPoppa's guide, I enter 707mm (stock sport front with 20" wheels) + 25mm (I want to lower 1 inch all-around) = 732mm for the fronts. For the rear left, it's 709mm + 25mm = 734mm. Since the rear right is 1" higher, I entered 709mm + 50mm (2" lowered) = 759mm.
Now they are even 1" lowered all-around. Remember you have to be on level ground.
I send you a PM with my number if you need help.
are you using DIS 4.4? I dont see this option in DIS 5.7.
INPA allows me to put in values to raise my rear end but nothing happens after I press OK.
INPA/DIS4.4 & 5.7 allow me to manually activate the compressors but as soon as they finish raising the vehicle begins to drop back to height it was.
I'm convinced I screwed up some ride height values last time (2 weeks ago) I was INPA now. now to fix them (phew, at least its not a mechanical issue). but new air bags wont hurt either. the old ones looked cracked and very soft.

Sent from my Nexus 9 using Tapatalk
__________________
I swear, my cars are like a girlfriend.
Sometimes its a rough ride, sometimes its smooth motorin'.
Sometimes she doesnt like how i treat her and sometimes i dont like how she behaves.
BUT at the end of the day, she loves it when I am inside her.

_______________________
'91 850i
'05 X5 4.4i
'09 Clubman S

Last edited by Clockwork; 02-17-2017 at 12:47 PM.
Reply With Quote

Sponsored Links