Quote:
|
where were you for the last ten years?
|
Lurking, trying to keep german cars on the road....
Quote:
|
Coding the GM and other modules is super easy when using NCS Dummy
|
Very True. Used the Dummy to program it, and edited the origional post to reflect it.
Quote:
|
If my rack ever goes I do have the plug in the engine bay so I would definitely do this
|
Highly recommend it. Only Slightly more expensive for a used unit, but you have to be very specific about making sure the servo is included, and part of the unit. A new servo is about $300 as I recall. Most yards I talked to didn't know the difference, which you can use to your advantage, if you can verify the unit with photos. The other way to make sure is to get a rack off of an 4.6is or 4.8is, as all racks were servotronic on these models.
Steering is very light when near zero MPH. Makes it substantially easier to maneuver a trailer, which is one of her primary tasks. It progressively gets less assisted, even by 15-20 MPH. Still get great steering feedback on highways and curves. Win win situation.
