Hi,
Got all of the wiring run yesterday and added $316 to the VA for both the CAS and FRM modules.

I can read and code the HKL module, but it's not doing anything... doesn't even light up the button on the inside of the tailgate.
Got Error Code A2C7 (can't find what this is anywhere??) in the HKL module a couple of times last night, but cleared them and they haven't re-occurred.

I tested both actuators with 12v and they both move OK. The switches on the dash, outside of the tailgate and the new switch inside of the tailgate all unlatch the locking mechanism like they should, but nothing from the HKL... it's just doing nothing at all.

Been over the wiring and tested all connections (lower tailgate switch, CAN obviously if Ic an read the module, inside switch) and all seem to be proper and working OK, and the two 12v connections are correct.

All of the parts and the HKL module are new, so shouldn't have any concerns about bad parts.

Any ideas?

Thanks,
John

__________________

2008 4.8i X5 (2/25/08) 105k:
Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis;
///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails
Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids
1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust