Quote:
Originally Posted by blue dragon
1. After you do F1, then F3, select E70, then read the ECU (pick CAS or FRM) You should have the full FA loaded.
Pick enter FA, then go modify it with the ($xxx) for the power trunk. Then go code FRM, CAS and HKL (maybe JBBF too) with that FA. That will reset all the coding to the values in the FA (and in the process code them to work with the power trunk).
2. You will need to redo any individual coding you have, make sure you use the manipulation profile first before you do step 1 and backup all your .man files in the work directory as you read each module that you plan on defaulting. Apparently there is another program that allows you to save your coding while changing the FA, but I haven't used it.
Edit, I just looked at your FA trace, why are you changing your date to 1011? Not sure if you will be able to code the FRM with that date, since the script may be expecting FRM3 (which is what came with that build date)
|
Doing exactly as you outline in #1.
CAS works great, and is done.
FRM will not let me code the module without giving me the error as outlined. I can read it, save the .TRC as a .MAN and re-code it, which of course does nothing, but I can't code it with an empty FSW PSW.MAN file in FSW PSW or Expert mode. Always gives the same error...
The date was changed to 1011 for the CIC retrofit. Should I change it back and re-try the FRM?
Thanks,
JOhn