Hello everyone! I was reading through this thread and looks like there is a big chunk of good info here so instead of starting a new thread i thought ill just post my issue here.
My x5 has the trunk open but will not close with the button on the trunk issue. It will move up about an inch and then down an inch when i press the close button but there it stops. Pulled and put back the 5A fuse for the close button and it seems to reset it and the trunk will close with the button once but as soon as the upper trunk actuator locks on to the lower trunk,it goes back to the no close issue. Every time i do this fuse pull and put back,it resets and will close once. I am thinking either the hall sensors in the lock actuator on the upper tailgate are giving bad signal or no signal to the hkl or the hkl module is shot. Also noticed that no matter what opening height i set the trunk to,it will open all the way to the max every time.
I would really appreciate any input you guys might have!
Unfortunately cannot see the pictures TerminatorX5 uploaded anymore,probably due to this thread being old.