Fixed. Fits mostly pretty well got a little gap now. I applied silicone adhesive to the small peg side since its a little mutilated. Seems to be holding well but sticks out a tiny bit more than it used to. If it ever comes loose i'll just drill a small pilot hole in the peg and put a wide head self tapping screw in there.
Cleaned up the tumbler assembly was really dirty and greasy. Wish I had not taken the cover off tho since it seems to have a little gap now too but might just be the way it is sitting on the gasket (which is in decent shape just cleaned it up)
Oh well whatever it's good enough for $20. Not a hard job but a pain in the ass to figure out how to fit the carrier up in there. I had to transfer the wire part from the OG carrier to the cheap Chinese one since it would not snap on to the latch assembly ball thing for the life of me. FYI it help if you have a blunt object to press on it with so it pops on.
Now that I got that door card off already next task is replacing that pesky window regulator for the 3rd time! Gonna zip tie the shit out of this go around!!
