Quote:
Originally Posted by DavMac
Ok! Finally got the proper codes today... Thank God for small miracles
004B6C heating crankcase ventilation, activation
0047FE reducing agent metering valve, activation
0046C4 reducing agent pressure line heating, activation
00480F NOX sensor after catalytic converter
0046CF reducing agent change over valve, activation
004A6F glow control until
004BAB reducing agent active tank fill level sensor
004BCB reducing agent passive tank fill level sensor
0046E4 reducing agent active tank heating activation
0047E9 reducing agent delivery pump
004D42 reducing agent repumping unit
004AB4 DDE control unit internal injector bank 5 voltage control
004F6F high irregular rotation
I hope you guys can work with this!!!
Thanks again
|
You have multiple issues here
Your glow control unit is probably dead due to the plugs constantly being heated, and most likely have a faulty thermostat. Its a common failure
You also most likely have a leak in your bulk head partition resulting in water shorting out your injector number 5. This will definitely cause running rough, and not turbo boost
You need a new active tank.