So I changed my cabin filter today under the passenger side. While doing that, I noticed that the air flap actuator had broken the tube/rod connected to it. I believe that has been causing my vent/flow problems. The rod that goes to the actuator is part of the blower motor housing. It never came with the blower motor because I changed that out thinking the flow problem was the motor/controller. I decided the turn the rod with a screw driver which caused my vent to blow a lot like it should. Once I turned the rod the other way, it restricted the air flow. Now I know what is causing the problem.

Does anyone know what part is connected to the blower assembly that has the rod built in. It connects to the air flap actuator?

I currently rigged it by putting super glue around it so it won't shift. I know not smart but it's sure blowing great through all the vents.