Quote:
Originally Posted by Fifty150hs
I have an issue with mine after replacing the windshield with non-OEM glass. How would you go about re-calibrating the sensor?
|
Use INPA. "Initialize" under "Karosserie (Body)\Rain and Light Sensor". From there just follow the prompts, pretty straight forward. This may or may not solve your problem. Make sure you have no bubbles in your windshield sensing area. If it has bubbles you will probably never get it to initialize. You might also double check that the sensor is plugged in. I have read a lot of installers not getting the connector plugged in properly.