|
While Im waiting on the code the install was easy.
I used the blue connector that was going to the old nav screen in the dash.
I used wire #6 (white) for the ibus signal and #2 (brown) for ground. I used the fuse tap on fuse #7 in the glove box which shows to be telephone for the positive wire of the ibus interface. This should be key switched. I will double check that when I go back out in a minute.
So the ibus interface has 4 wires. You don't use one of them.
So on the ibus its :
1. Red to switch power source - Went to fuse box #7
2. Brown to ground - Used wire #2 in blue connector of old nav harness which was brown
3. White to ibus - Used wire #6 in blue connector of old nav harness which was white-ish
4. Green isn't used - Its designed for switching the nav screen out for backup camera rigs on unique setups which we aren't using.
__________________
Just BMW's - All cars and trucks was two pages long
1994 318is
1997 528i
2000 323i
2001 X5 3.0 auto
2005 X5 3.0 auto
2011 535xi auto
2013 X5 xdrive35 Turbo
More are at my website
Aftermarket E53 Radio Install
|