Good to know
was there a set of instructions you used that was particularly helpful to code the vo $676?
there seems to be a ton of tutorials but very confusing if it's the same for e70
these are the instructions I found on e90
Quote:
Plug in cable to OBD port and selected usb port
Run NCSexpert
Click "file" and select "load profile" and select "expertmode"
Click "VIN/ZCS/FA
Click "ZCS/FA f. ECU
Select chassis type "e70"
On choose ECU select "CAS"
After your vin is shown select "enter FA"
Select chassis type "e70"
Ensure VIN shown is correct and select "OK"
Enter $676 and then select "add"
Then scroll down and select "£676" and select "OK"
Then select "Back button"
Then select "F4 Process ECU"
Then select from drop down list "CAS"
Then select "F2 Change Job"
Then select "FA_WRITE" and click "OK"
Ensure CAS is shown on "Get Coded" and FA_WRITE shown on "JOB NAME"
Select "F3 Execute Job"
The procedure need to be apply on both CAS and FRM modules !
|
I see the $676 was added to the cas and frm but I can't tell any difference.
wondering if and which other modules need to be coded to default ?
someone said the pdc and cic need to be defualt coded but I do not see them listed. all i see is MPDC and MCIC both give errors when triying to code them.
and what gage coil did you get ? there is 18, 20, 15 (
never mind I got the 20 coil)