Quote:
Originally Posted by bcredliner
The wires I want to put back in the correct slots are in the blue connector that goes into the back of the original radio. Is there something that lists the wire colors and slots they should be in?
The app is unlocked with DSP. There is no coding option for DSP, just the screen that I could pull up on original unit. Sound still comes on for 10-20 seconds and then goes off.
I certainly this is a communication problem rather that the only way to get their unit to work with DSP is to wire in the old tuner. Since it will be in the back I can probably hide it somewhere but what a cobbled up mess that will be.
|
DSP isn't plug and play. The sound turning off has nothing to do with the ibus app or your wiring. I didn't mess with any of the board monitor wires behind the screen. I used my MediaBridge adapter already hooked up in the trunk. To get sound, you first have to "hotwire" the DSP amp which it appears you've done since you're getting sound. The ibus system pings all devices in the chain - radio, navigation, board monitor, etc. If any of those devices is missing, the amp won't stay on. You need to leave the factory radio connected in the trunk. Second, you have to code the amp using NCSExpert.
1. Read the module (could be called AMP, DSP, radio) with NCSExpert in Manipulation mode
2. Edit the module value called: BEDIENELEMENTE
3. Change the value from "bordmonitor" to "mid_basis"
4. Save the new configuration file
5. Run SG_CODIEREN in NCSExpert
Your amp should stay on as soon as the coding is done. There's no way to do the coding through the ibus app. You'll need to use NCSExpert