|
first, i think you would need to look in to why you have all 3 lights; grab a good scan software; not sure what your scanner is pulling for codes.
lock to lock is not calibrating
i suggest you order a cable for INPA (30-40$ on ebay); look for the software on the internet and download it; you might need to solder pins 7 and 8 to make it connect to the car;
the SAS is not that common to go out on these cars; so first i suggest to try some cheap things because if you go the sas route it might end up to be a bit expensive and might not be the issue to begin with.
|