|
INPA & Co work perfectly on a Macbook.
- Buy the cable
- Go to a torrent site, download a Windows XP SP3
- Download Virtual Box and add on package (a little below the main software on the download page (google it)
- Download BMWEasyTools.zip (google it)
- Install virtual box
- Create a virtual machine in virtual box using the Windows Image as boot (to install it)
- Install the virtual box add on package (allows for drag and drop from the mac to the virtual machine
- Drag BMW Easy Tools to the VM
- Install it
- Install the cable drivers (Included in BMW Easy Tools)
- Reboot the VM
- Launch the VM
- Plug into the car
- Plug into the macbook
- Direct the usb connection to the VM (icons in the bottom bar of the window)
- Go to start > Control pannel > System > hardware > device manager > Serial adapters > Open the cable (> Settings > advanced > Com port : Com 1) (the part in brackets is fuzzy, I'm not connected to my car right now)
- While you're in the System window, go to automatic updates and disable them.
- Launch INPA and select E53 then find the steering angle sensor in the options and calibrate.
If it can't connect to the SAS, you need to jump pins 7&8 on the OBD cable. Open the plug, find them (usually numbered inside the black plastic plug on the plug side) and with a soldering iron or a clamp or anything that will jump them together, do it.
You can also try E53 > Select the shown item in the right list (IDENT....) and select ident so it lists existing modules.
Try inpa again, it should work.
I'm currently putting together a video that shows all of these steps but its not done since I'm doing how to set up all of these softwares.
|