Quote:
Originally Posted by Overboost
OK a quick question. When you hear the 5 second beep when going into reverse, is the beep in the front or the rear? From your findings, I think you may have 2 separate issues. In the rear you need the one sensor that has no faint clicking. In the front, there must be a wiring issue. Maybe a closer inspection to make sure the wiring is intact and not broken. I have read where some faults have been caused by rodents chewing the wires. Just an idea...
|
I believe that the Beep is the rear higher pitched tone.
It is continuous for around 5 seconds with a constant green light. The tone then stops the light changes to flashing and eventually stops after about 30 seconds (not sure on the exact timing)
I am unsure how you activate just the front sensors apart from using inpa?