From my ibus adapter page :
http://crowz.narmir.com/vehicles/bmw...apter-android/
Quote:
So on the ibus its :
1. Red to switch power source – Went to fuse box #7
Fuse shunt I used for #7 fuse in fuse box > http://amzn.to/2kwjRel
2. Brown to ground – Used wire #2 in blue connector of old nav harness which was brown
3. White to ibus – Used wire #6 in blue connector of old nav harness which was white-ish
4. Green isn’t used – Its designed for switching the nav screen out for backup camera rigs on unique setups which we aren’t using.
|
The #whatever part is the pin in the blue connector. They are numbered. If you look at the end of the plug you will see 1 and 12 on the connector. Just count across from 1.
So the second hole is Pin #2 which is ground.
The 6th hole is pin #6 which is a white wire and is the ibus wire.
I went to the fuse box on fuse #7 for my power source.